360 bird view parking system integrated with can-bus decoder
Dedicated series for VW, Audi, Benz, BMW, Volvo, etc.
180° high definition Camera , high definition image
360° bird view image ,no blind spot
Easy to install and adjust
28 hours 4 channel's DVR
Parameter for host:
1. Working Voltage: 9-16V
2. Working Current: <500mA
3. Quiescent Current: <10mA
4. Working Temperature: -20~70degree C
|Bird-view CPU Box||system core part|
|Front camera||180°wide angle HD night vision Camera at car front|
|Right camera||180°wide angle HD night vision Camera at car right side|
|Rear camera||180°wide angle HD night vision Camera at car rear|
|Left camera||180°wide angle HD night vision Camera at car left side|
|Camera extension line||camera’s power supply changeover and extension connection|
|Controlling wire||wires to reverse line, left/right signal line, infrared line…|
1) The host can be placed anywhere in the car, but due to the video
file is stored in the SD card which is in the host, so it is highly
recommended that the host should be put under the chair or under
steering wheel and the card can be taken conveniently.
(2) The host should be fixed somewhere in case of influencing the
conserved files when shocking.
(1) Back camera: universal camera installed at car back should be
above the ground at least 400mm,and it will be better to see the
car when the image is displayed in screen.
(2) Front camera: universal camera installed at car front should be
above the ground at least 400mm, and it will be better to see the
car when adjusting the viewing angle. Special one should be
customized. Due to high temperature of engine, connecting wires
should be far away from the engine, and it’s better to use thermal
insulation material for video wires and power wires. Pay attention
to make connecting part away of water.
(3) Left/Right side cameras: drill holes at left and right side
mirror housing, install cameras in, and then adjust the viewing
angle by hand.